Roof Repair in Pembroke Pines, FL
Our professionally trained crew can help you with all kinds of roof repairs in Pembroke Pines, FL. Roof leaks are such a hassle especially when it just suddenly appears during a heavy rain.
Water collection on the roof may go unnoticed for a while. And it only becomes apparent once rain water starts leaking through the walls or ceiling. Often you realize the need for roof repair only when the damage is already big.
Most of the leak problems found near your house walls can easily be traced back to an unaddressed or overlooked problem in your roof gutters. Here are a few maintenance ; repair tips you can do to keep your gutters in good working condition.
1. Clear Your Roof Gutters Of Debris Regularly.
A basic step to roof repair is to clear your gutters of whatever debris is blocking rain water from flowing into the downspout. Most roof leaks result from water build-ups from these clogs that settle in the roof area too long that the water begins to find its way into crevices and small openings in the roof area. This causes damage you could easily avoid.
Make sure you have a bucket or a container ready. It’s where you can put the debris you collect from the gutters. If you haven’t cleaned your gutters for quite some time, expect also some hard debris build-up stuck around the insides of your gutters.
You will need to use a small gardening trowel to loosen these build-ups so that water can flow through freely. It is best to do all these using a working ladder. Go through it section by section to avoid the risk of any accidental fall.
Keep your water hose ready as well. You will need to hose each section down to flush out any remaining dirt, once you’ve removed all the debris.
If you’re not comfortable and familiar with working on a ladder (especially if have a two-storey house), it might be best to get a professional to do this gutter clearing instead.
2. Check Your Roof Gutters For Any Leak.
If you notice any leaks in the gutter, clean up the area immediately. Fix it right away with a gutter sealant. If you notice rust that could potentially cause a leak later, apply a rust remover. Then paint over it once it dries.
3. Make Sure The Gutter Does Not Retain Water At Any Section.
If water is settling at a section of your gutter, then you will need to adjust its slope. It should be at a ¼” decline for every ten feet towards the downspout. To do this, you will need to make adjustments by either repositioning the gutter hangers. You may also need to add a few more gutter hangers to some sections that need further realignment and reinforcement.
4. Make Sure The Downspouts Are Not Clogged.
The International Journal for Service Learning in Engineering reports that overshooting of gutters is a common roof problem and often be the cause for expensive roof repairs. And it increases with rainfall intensity. A clogged downspout is a primary cause.
Clean the strainers in each downspout as you check them for any clogs. If there are build-ups in the pipes that are difficult to remove, loosen them with either a high pressure hose or a plumber’s snake. Hose each pipe down to flush out any remaining debris.
5. Install Gutter Screens.
Weather conditions like rain, hail and strong winds can trigger debris accumulation problems. USNews reports that these can easily cut the life span of any roof type. Install gutter screens to keep debris from accumulating quickly and avoid costly roof repair jobs. It also lessens the times you need to check and clean it.
Regularly maintaining your roof gutters and downspouts clear of debris can help you avoid an unplanned, costly repairs on your roof. For help with roof repair in Pembroke Pines, FL, give us a call any time, we offer full 24/7 emergency services. Our well-trained and helpful staff will be glad to assist you in any of your house roofing needs.